D90 offsets for 924s
#1
Burning Brakes
Thread Starter
Join Date: Apr 2011
Location: Perthshire, Scotland
Posts: 838
Likes: 0
Received 0 Likes
on
0 Posts
D90 offsets for 924s
I am looking at a set of D90`s for an 86 924s the sizes and offsets are
7" with 55 ET front
8" with 52.3 ET Rear
Should these fit ok ?
any help appreciated
Gaz
7" with 55 ET front
8" with 52.3 ET Rear
Should these fit ok ?
any help appreciated
Gaz
#2
Rennlist Member
Have seen 6"x16" OE 931 forged rims fitted, front and rear, and have seen 6"x16" and 7"x16" D90s fitted, front and rear, respectively...no issues.
The 7" D90 should fit up front with a 195/205, but depending on your car's suspension geometry and tire size/manufacturer, the 8" D90 in the rear could cause interference with the fender lip.
The 7" D90 should fit up front with a 195/205, but depending on your car's suspension geometry and tire size/manufacturer, the 8" D90 in the rear could cause interference with the fender lip.
#4
Burning Brakes
Thread Starter
Join Date: Apr 2011
Location: Perthshire, Scotland
Posts: 838
Likes: 0
Received 0 Likes
on
0 Posts
Gents thanks for the replies I am looking at fitting spax adjustable coilovers and fancy this look for the d90`s the diamond cut look nice as well
#6
Rennlist Member