testing SIX alternator
12-05-2004, 11:26 PM
#1
AutoX
Thread Starter
Join Date: Nov 2004
Location: Napa, Ca
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
testing SIX alternator
I'm converting my '74 2.0 FOUR to a SIX.
the motor is likely based on a '69 2.0. 901/06 on the block.
Came out of a tube chassis desert race car, so it may have been ( hopefully ) built up a bit. 130 HP potential regardless.
Anyway, I just replaced the alt'n'r with a rebuilt unit and would like to test it before the install for my peace of mind. Replacement requires a motor drop.
I can bench run it. What's the best approach to the test?
thanks, KT
the motor is likely based on a '69 2.0. 901/06 on the block.
Came out of a tube chassis desert race car, so it may have been ( hopefully ) built up a bit. 130 HP potential regardless.
Anyway, I just replaced the alt'n'r with a rebuilt unit and would like to test it before the install for my peace of mind. Replacement requires a motor drop.
I can bench run it. What's the best approach to the test?
thanks, KT
