911pcars

I just posted this on the 911 side, but this should apply to 912s (and all cars) as well:

I just put together a web page on installing a remote starter switch. With high replacement costs and availability for certain early switches suspect or NLA, I figure this might extend switch life a little.

Go here: http://members.rennlist.org/911pcars

Sherwood

Steve Jensen

Using a relay to save the switch is popular for us 356ers... especially with 6v systems. For "remote" starting, I just ran a wire from the starter back to the engine compartment - put key in "run" position, touch wire to B+ on the regulator, and she turns over.