Scott H

Hello all, I don't usually venture over into these parts as I have a 944 Turbo, but I need to pick the minds of some K27 gurus.

I purchased the 7200 wheel and backplate off eBay, but I still need a compressor housing. That said, if anyone has a 7200 comp housing sitting around they want to sell, email me ASAP please!

I've had trouble tracking one down, so I'm trying to expand my search to other K27 housings that I could machine out to fit the wheel. Is this as simple as finding any other K27 housing with a smaller ID on the intake (basically smaller inducer on the compressor wheel), and boring that out to the 7200's inducer diameter? Would the interior of the compressor housing need recontoured as well or is the rake going from inducer to exducer the same on all K27s or just not as critical to be near flush?

Thanks for any help!

Benny771

Try Brian. Great guy.

http://www.rarelyl8.com/

Or put this post here.... or in the forsale section http://forums.pelicanparts.com/911-9...harging-forum/

Scott H

Thanks, contacted Brian who referred me to Kevin at UMS to who I had already talked. Also now have a post up at Pelican.

JFairman

http://www.durabilt-turbo.com/

the real deal.