Just removed my air injection from my 3.3 1992 965 when was rebuilding my engine,plugged cylinder heads...i was wondering if i now need the following parts shown below,,if so what parts do i hane to keep and what parts can i leave out,,do i plug pipes etc????.....first picture shows the part that sits on the right hand side of the engine the second part sits on the left and has a small pipe running into the throttle body from it..

 

Ditch all of it. Cap off the connection to the throttle body.

 

will try that then,just wasnt so sure with there being a lot of stuff including wire block connector etc in second picture