I too would have to say get a good intercooler on there.

 

What are most people doing with the a/c condensor? I would like to run a full bay intercooler but i would have to remove the condensor. Not a very big deal, but believe it or not the a/c works surprisingly well on the car.

 

They have been mounted underneath the car, works much better as well.

 

Here are some pics the day i bought it from the original owner in Portugese Point, Palos Verdes. Not the best pics, camera phone, but their the only ones i have saved on my desktop currently. The bra was the first thing to go.

 

The other thing you should do is upgrade the brakes. The 77 turbos have the Carrera brakes, so you should atleast upgrade to 3.3 litre ones.

Cheers

 

I was looking into the big reds that Performance products offer, but they don't offer any upgrade for the rear. Is there a better alternative?

 

Don't buy anything at Perf Prod. They are more expensive than anybody. Check with Imagine or Rennport.

 

Put your old front calipers on the rear?

 

Yes.

 

The brakets mount up the same? Also do you have a web adress for the shops listed above?

 

You have to install the right front on the left rear and the left front on the right rear, plus swap the cross over lines and bleeder screws I think, but that it.

http://www.imagineauto.com/index2.htm

http://www.rennsportsystems.com/~porsche/2a.html

 

Great thanks for the info! What are thoughts on wheel and tire sizes since i have to replace all four tires from the spinout i had ( flatspots )? Are 19's to much for the cars suspension and chassis to handle?, and if so what size and how wide is recomended? Any pics of the a/c condensor relocation to under the car in order to make room for a full bay intercooler? Also i was thinking to go with the c2 turbo bumper update along with the 3.8 rear tail that has air ducts for the inercooler. Any pics and thoughts on this mod?

 

I use 18" x 9" & 11"wheels. 17" will work as well. 19" would be too big IMHO.

If you do the rear C2T bumper, are you going to do the front? Seems you need to make it "look" right. Or have some kind of air dam.

 

Yeah, i wanted to update both bumpers the rockers and run the 3.8 rear tail. I think the 3.8 rear tail is the same or similiar to the pic of the one on your car.

 

Actually the 964 3.8RS tail does not have air inlets. Make sure the tail you buy has inlets in them.

Oh, you will need the 964 rear lights, reflector and front lights too.