The 930 rebuild.........beginning to end, the process in pictures
07-02-2006, 07:24 PM
#32
Thinking outside da' bun...
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Just a pic of those mahle P/Cs makes me have flashbacks. those boogers arent cheap.
07-10-2006, 11:55 PM
#38
Thinking outside da' bun...
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Is that the CF shroud from Autobahn Extremist?
I love mine. I think it weighs about half a gram.
I love mine. I think it weighs about half a gram.
07-17-2006, 04:01 PM
#43
Former Vendor
Thread Starter
Scraped the gaskets from the injector blocks and sanded them smooth.
Refinished the faded fuel lines with high temp silver paint.
Old and new shrouds - need to drill out rivets and install on CF shroud.
Engine assembly begins later this week!
Refinished the faded fuel lines with high temp silver paint.
Old and new shrouds - need to drill out rivets and install on CF shroud.
Engine assembly begins later this week!
07-17-2006, 06:48 PM
#44
Former Vendor
Thread Starter
Here is how the paint on the fuel lines turned out:
Pretty happy with the decision to leave the nut ends the way they were so when wrenching, they stay decent looking -
Pretty happy with the decision to leave the nut ends the way they were so when wrenching, they stay decent looking -
07-19-2006, 05:00 PM
#45
Former Vendor
Thread Starter
Does it stand to reason to put the highest flow injectors (per shop results of injector flow test and clean process) in the #1 and #6 positions?