Speedometer help
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Jun 2004
Location: Near Atlanta, Ga. Peachtree City
Posts: 1,344
Likes: 0
Received 1 Like
on
1 Post
Speedometer help
I need a replacement 930 [160mph] speedometer. My center drive unit went out. Any body know of one? My e-mail is yarbros@comcast.net.
Rudy
Rudy
#2
Burning Brakes
Join Date: Jul 2004
Location: Land of Milfs and honey (SoCal)
Posts: 1,100
Likes: 0
Received 3 Likes
on
1 Post
Here is where I (and pretty much everyone else Porsche) sends there gauge work. the last one I sent (930 coincedently) for an odometer inop. came back for around $100! they are THE word for what you need.
PALO ALTO SPEEDOMETER
PALO ALTO SPEEDOMETER
#3
Advanced
Join Date: Jan 2004
Location: Wrong Beach, CA
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
You can also try:
North Hollywood Speedometer at http://www.nhspeedometer.com
I had some work done on my tach/boost gauge there last week and the service was great, as were the prices. I've never heard anything bad about them on this, or any other board.
- John
North Hollywood Speedometer at http://www.nhspeedometer.com
I had some work done on my tach/boost gauge there last week and the service was great, as were the prices. I've never heard anything bad about them on this, or any other board.
- John
#5
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Jun 2004
Location: Near Atlanta, Ga. Peachtree City
Posts: 1,344
Likes: 0
Received 1 Like
on
1 Post
Thanks for the advice. I found a used speedo at Georgia Dismantlers. I was able to go there physically and let me tell you it was a sad but exhillarating sight at the same time. So many Porsches and so many models to look at. I also needed some small items and David [He works there], let me take the parts off. I needed the inside sliding sunroof headliner panel and some screws as well as the speedo. Real nice people to deal with!
I had asked earlier about whit face overlays for the instruments in my 930 and I finally got them put in. It was easy and they look great. I know that the better option is the silk screen people but saving over $300 was just too good to pass up. I did buy a K 27 from Stephen along with a one bar spring and will let you know how it turns out. I will have it dynoed to get a real picture. Stock was dynoed at 263 RWHP.
Rudy
I had asked earlier about whit face overlays for the instruments in my 930 and I finally got them put in. It was easy and they look great. I know that the better option is the silk screen people but saving over $300 was just too good to pass up. I did buy a K 27 from Stephen along with a one bar spring and will let you know how it turns out. I will have it dynoed to get a real picture. Stock was dynoed at 263 RWHP.
Rudy
#7
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Jun 2004
Location: Near Atlanta, Ga. Peachtree City
Posts: 1,344
Likes: 0
Received 1 Like
on
1 Post
Jim,
They are located just north of Atlanta, Ga. and do most of their business by mail or e-bay. Their e-mail adress is germanautodismantlers.com. They had turbos, RS America, A brand new GT 3 that crashed on it's first race. It was a wonderland. Not like some of the newer yards that have everything all stacked and neat. This yard you just go find a car that you want to look at and go to it.
If you call them for a part, have the new part price because they usually halve it. Ask for David.
Rudy
They are located just north of Atlanta, Ga. and do most of their business by mail or e-bay. Their e-mail adress is germanautodismantlers.com. They had turbos, RS America, A brand new GT 3 that crashed on it's first race. It was a wonderland. Not like some of the newer yards that have everything all stacked and neat. This yard you just go find a car that you want to look at and go to it.
If you call them for a part, have the new part price because they usually halve it. Ask for David.
Rudy