My Car is on Ebay
#1
Intermediate
Thread Starter
Join Date: Jul 2002
Location: San Diego, CA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
In case anyone is looking for a well done 930, mine is listed on Ebay
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2446001877
James
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2446001877
James
#2
Intermediate
Thread Starter
Join Date: Jul 2002
Location: San Diego, CA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Just thought i would add that I ran 1:28's at Willow in the car on old Kumhos last month.
More info can be found at my website www.jamesgw.com
More info can be found at my website www.jamesgw.com
#4
Intermediate
Thread Starter
Join Date: Jul 2002
Location: San Diego, CA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The header was done by a contractor of 911 Design (Loren Beggs). They have a jig of mine so they can build more.
321 stainless with Reid Washbone (spelling??) flanges. Very nice work.
The car weighs ~2700lbs depending on fuel level with the cage. Without it would be around 2650.
On new slicks I would think the car could run 1:25's.
Next is still up in the air. I am waiting for the SCCA's SEB to make some rulings on classing for the next year before making any decision.
James
321 stainless with Reid Washbone (spelling??) flanges. Very nice work.
The car weighs ~2700lbs depending on fuel level with the cage. Without it would be around 2650.
On new slicks I would think the car could run 1:25's.
Next is still up in the air. I am waiting for the SCCA's SEB to make some rulings on classing for the next year before making any decision.
James
#5
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Nice ride. I actually saw it for sale on another site. I can't remember the asking price but I thought it was a little high, like 60 or 70,000. Is this correct. Not saying it isn't worth it to the right person. Do you still have your fuchs?
Eric
79 930
Eric
79 930
#6
Intermediate
Thread Starter
Join Date: Jul 2002
Location: San Diego, CA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have it for sale on AutoTrader.com for $49,500 and on PCA's site for the same price. A while back I was asking $65K, but I am resigned to getting less:-)
The Fuchs were sold a while back.
James
The Fuchs were sold a while back.
James
Trending Topics
#10
Intermediate
Thread Starter
Join Date: Jul 2002
Location: San Diego, CA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
There is no AC on the car now the car weighs 2,700lbs though:-)
I can get a dyno run on the car, but it will take me a bit to arrange..
We tuned using wideband 02 and datalogging starting with a base map from an identical motor that has run well in POC's GT1-R for years (Loren Begg's white car). The car runs ~ 10.7:1. I have an in car AF meter in the car too to monitor for any problems.
I can get a dyno run on the car, but it will take me a bit to arrange..
We tuned using wideband 02 and datalogging starting with a base map from an identical motor that has run well in POC's GT1-R for years (Loren Begg's white car). The car runs ~ 10.7:1. I have an in car AF meter in the car too to monitor for any problems.
#12
Intermediate
Thread Starter
Join Date: Jul 2002
Location: San Diego, CA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It has twin plug -- dual MSD 6a's controlled by the Motronic firing MSD coils going to a 964 twin plug distributor.
Last edited by James Gunn; 12-03-2003 at 06:33 PM.
#13
Three Wheelin'
Join Date: Jun 2001
Location: SF Bay Area
Posts: 1,276
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Oh - I could not see any holes or plugs running into the lower valve covers. What type of system did you use for that.
I should tell you that I am just curious about your car. I own a pretty modified 930 but yours is a few steps further along. The suspension looks really interesting as well. Is this car streetable?
Why are you selling after so few miles? I would imagine you must have six figures into this car.
I should tell you that I am just curious about your car. I own a pretty modified 930 but yours is a few steps further along. The suspension looks really interesting as well. Is this car streetable?
Why are you selling after so few miles? I would imagine you must have six figures into this car.
#14
Intermediate
Thread Starter
Join Date: Jul 2002
Location: San Diego, CA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
There are wires going into the lower valve covers. System? Stock wires.
As much as possible I tried to use all factory Porsche parts. Factory wiring harness from the 3.2 carrera, factory sensors, etc.
I am selling the car to do more road racing.
As much as possible I tried to use all factory Porsche parts. Factory wiring harness from the 3.2 carrera, factory sensors, etc.
I am selling the car to do more road racing.
#15
Three Wheelin'
Join Date: Jun 2001
Location: SF Bay Area
Posts: 1,276
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
When I said system - I meant what twin plug setup - it almost looks like you are running a 964 dual distributor setup but I htough that would not fit on the 3.3 engine.
In any case - it looks like a good deal for someone who knows what all this stuff costs to do. Good luck.
In any case - it looks like a good deal for someone who knows what all this stuff costs to do. Good luck.