Notices
911 Forum 1964-1989
Sponsored by:
Sponsored by: Intercity Lines, LLC

Fuel Injection Type and Model Years

Thread Tools
 
Search this Thread
 
Old 10-24-2003 | 12:56 PM
  #1  
CDM308GTB's Avatar
CDM308GTB
Thread Starter
8th Gear
 
Joined: Oct 2003
Posts: 8
Likes: 0
From: Philly
Default Fuel Injection Type and Model Years

Can someone tell me when Porsche went from CIS to the Later type injection systems and what it was (Bosch)? Also, what fuel injection systems were used on the later 911's from 89-94 C2/C4?

Thanks All,
Chris
Old 10-24-2003 | 03:20 PM
  #2  
Steve Weiner-Rennsport Systems's Avatar
Steve Weiner-Rennsport Systems
RL Technical Advisor
 
Joined: May 2001
Posts: 11,871
Likes: 66
From: Portland Oregon
Default

Hi Chris:

1984 and on 911's used the Bosch Motronic EFI system. '89-'94 964's used a more complex version of the same thing. These cars didn't get full sequential injection until the '95 OBD-I model.
Old 10-24-2003 | 03:30 PM
  #3  
BER's Avatar
BER
Pro
 
Joined: Aug 2001
Posts: 640
Likes: 4
From: Central Virginia
Default

Porsche went from CIS to Bosch Motronic in MY1984 for the normally-aspirated 911's. This was also when Porsche went from 3.0 to 3.2 liter engines.

The 89-94 911's had a 3.6 liter engine and used the same Bosch Motronic system with improved sequential fuel injection; the 84-89 911's with 3.2 liter Motronic systems had fixed injection timing.

My source is Paul Frere's book the "Porsche 911 Story".

Bruce
Old 10-26-2003 | 12:08 AM
  #4  
Warren Bain's Avatar
Warren Bain
6th Gear
 
Joined: Oct 2003
Posts: 6
Likes: 0
From: No where!
Default

Originally posted by Steve Weiner-Rennsport Systems
Hi Chris:

1984 and on 911's used the Bosch Motronic EFI system. '89-'94 964's used a more complex version of the same thing. These cars didn't get full sequential injection until the '95 OBD-I model.
Shouldn't that be OBD-II? It's a federal requirement in MY 1996. I have two Volvos with OBD-II and that system is really great, once you have a code reader.

Regards
Old 10-26-2003 | 01:53 AM
  #5  
Steve Weiner-Rennsport Systems's Avatar
Steve Weiner-Rennsport Systems
RL Technical Advisor
 
Joined: May 2001
Posts: 11,871
Likes: 66
From: Portland Oregon
Default

Hi Warren:

The OBD-I '95 993's were full sequential.

Certainly all OBD-II 993's (96-98) were full sequential, as well.
Old 10-28-2003 | 09:07 PM
  #6  
CDM308GTB's Avatar
CDM308GTB
Thread Starter
8th Gear
 
Joined: Oct 2003
Posts: 8
Likes: 0
From: Philly
Default

Thanks all, you've been a great help. I drew a blank and should've known they went to Motronic when they went to the 3.2. My bad.



Quick Reply: Fuel Injection Type and Model Years



All times are GMT -3. The time now is 08:24 AM.