Headers for 3.2
#1
Headers for 3.2
Looking to purchase headers 1.625" for 3.2 motor installed in my 75. Will probably go M&K 2 in 2 out muffler. Want Pcar sound not V8 sound, I am OK with it being louder but do not want drone.
Questions:
My initial thought is to go no heat - for those that have gone that rout any regrets with no heat? This is an 80% street car, sunday driver.
Mandatory requirement: Ability to remove lower valve covers without loosening Headers.
What brand?
BHP ( Buckley racing)
B&B
Fabspeed
??
Recommendations and opinions appreciated.
Questions:
My initial thought is to go no heat - for those that have gone that rout any regrets with no heat? This is an 80% street car, sunday driver.
Mandatory requirement: Ability to remove lower valve covers without loosening Headers.
What brand?
BHP ( Buckley racing)
B&B
Fabspeed
??
Recommendations and opinions appreciated.
#2
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Nov 2006
Posts: 4,717
Likes: 56
From: Fort Washington, Pa
PM heading your way, lets chat
__________________
Porsche Performance Specialist
John@Fabspeed.com
215-618-9796
Fabspeed Motorsport USA
155 Commerce Drive Fort Washington, PA 19034
www.Fabspeed.com
Porsche Performance Specialist
John@Fabspeed.com
215-618-9796
Fabspeed Motorsport USA
155 Commerce Drive Fort Washington, PA 19034
www.Fabspeed.com
#3
Here's a lot of information on exhaust systems and headers.
Keep in mind that there are various grades of stainless. Then we have the systems made from Inconel 625.
Then we get to the coatings. Ceramic is very popular these days.
Richard Newton
Keep in mind that there are various grades of stainless. Then we have the systems made from Inconel 625.
Then we get to the coatings. Ceramic is very popular these days.
Richard Newton