Need Spring divider 2.4 inch ID
03-29-2013, 09:39 AM
#1
Rennlist Member
Thread Starter
Join Date: Jul 2003
Location: Peachtree City, Ga
Posts: 1,952
Likes: 0
Received 64 Likes
on
54 Posts
Need Spring divider 2.4 inch ID
I need a set (4) of spring dividers for my Koni shocks. Need to go between the main coil springs and the helpers that hold the mains in place. The problem is the dividers need to have an ID of 2.4 inches to fit around/ on my shocks.
Does any one know where I can obtain a divider with this ID. Most spring dividers I have found have a ID of 2.15 inches - designed to work with today's smaller diameter shocks.
Any ideas on where I can find such a beast - thx
Does any one know where I can obtain a divider with this ID. Most spring dividers I have found have a ID of 2.15 inches - designed to work with today's smaller diameter shocks.
Any ideas on where I can find such a beast - thx
03-29-2013, 12:58 PM
#3
Rennlist Member
Thread Starter
Join Date: Jul 2003
Location: Peachtree City, Ga
Posts: 1,952
Likes: 0
Received 64 Likes
on
54 Posts
LOL - I guess I should have seen that one coming
I do apologize for being so rude -
It is a re-fabricated torsion bar - made to look like a large valve spring
I do apologize for being so rude -
It is a re-fabricated torsion bar - made to look like a large valve spring