Options for 911R type center fill fuel cap setup
#1
Options for 911R type center fill fuel cap setup
Can you all give me some available options for a 911R center fuel fill system using the modified Blau cap. I am looking to put one on an aluminum ATL plate. I am looking for the parts to fabricate the unit including a cap like the ones Martin Baker used to sell.
Thanks in advance...
Thanks in advance...
#3
#4
http://www.pbase.com/9146gt/blau_110mm_aluminum_cap
http://forums.pelicanparts.com/porsc...inning-11.html
http://forums.pelicanparts.com/porsc...inning-17.html
http://cgi.ebay.it/Porsche-911R-RSR-...item35b4877a3e
http://forums.pelicanparts.com/porsc...inning-11.html
http://forums.pelicanparts.com/porsc...inning-17.html
http://cgi.ebay.it/Porsche-911R-RSR-...item35b4877a3e
Last edited by Amber Gramps; 09-20-2011 at 07:43 PM.
#5
......and to be more specific:
http://cgi.ebay.it/Porsche-911R-RSR-...7#ht_500wt_922
http://www.fvd.de/us/en/Porsche-0/-/...Tank_100l.html
http://www.ebay.co.uk/itm/Porsche-91...#ht_1414wt_903
http://cgi.ebay.it/Porsche-911R-RSR-...7#ht_500wt_922
http://www.fvd.de/us/en/Porsche-0/-/...Tank_100l.html
http://www.ebay.co.uk/itm/Porsche-91...#ht_1414wt_903
Last edited by Amber Gramps; 09-21-2011 at 05:22 AM.
#7
Any real world replies would be appreciated.
Trending Topics
#8
Unless you have an original to look at, you may be on your own. If you run into a car thats had this done, you may take the opportunity to look/photo. I'm not sure where or how people fabricate these, but I'd be prepared to take a fair amount of artistic license. The cap may be the easy part.
#9
That's kind of what I am thinking Whalebird. I am going to look at a couple different cars this week and see if I can R&D them. Ripoff & Duplicate. I will also take a look at a few at Rennsport.
Thanks
Thanks
#10
#11
Whats the issue? Well I said modified cap so that would imply at minimum the fin but of course I want drilled. I also want aluminum overflow well and up pipe. I have PM'd ebay people over a week ago without reply. Believe it or not we have Google in New Mexico so I'm more looking for someone who has really done it than some one who has looked it up...
Any real world replies would be appreciated.
Any real world replies would be appreciated.
Contact Tre Motorsports; http://tremotorsports.com/product.cfm?Node=10344
#12
Thanks Tom, that seems to be the best one I have found so far. I am hoping to find the bottom unit in aluminum. I will have to look at a few with my own eyes, in the real world...
Oh Drama dribble for post count some where else OK?
Oh Drama dribble for post count some where else OK?
Last edited by Darkstar1; 09-22-2011 at 01:18 AM. Reason: Too much Drama.
#13
What was your problem with my helping anyway? You post a request that seems so obvious that I can't imagine you really needed any help. It actually looked like you had it handled. You don't need help with what you are looking for. You need help in accepting the help you receive. I figured there may be folks that didn't know what you were talking about so I put in a bunch of links to make it obvious what it was you were looking for.
#14
Seriously dude, what is your problem?