Caring For Fuchs Wheels
#17
uninformed gas bag
(contemplating on whether gas bag is one or two words)
Rennlist Member
(contemplating on whether gas bag is one or two words)
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Nice wheels Woot.
I just ordered a couple of rattle cans from these guys of GP white
http://www.automotivetouchup.com/
I just ordered a couple of rattle cans from these guys of GP white
http://www.automotivetouchup.com/
#24
Parts Specialist
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I was just noticing this - and now that I mention it, it will give Amar something to do today
![evilgrin](https://rennlist.com/forums/graemlins/evilgrin.gif)
anyone know the "correct" alignment of the center car
I have been under the impression that it should be pointing towards the valve stem - and the locking lug goes in the hole between the center and the valve stem.... anyone confirm?
#27
Parts Specialist
Rennlist Member
Rennlist Member
#28
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Ray, thought I would revive this thread of yours just for the benefit of everyone here. As you can all see my Fuch's had painted centers but my wife's MINI convertible has alloy wheels with an anodized finish something similar to Fuchs. So I thought I would document the procedure for the benefit of others. The car has 25,000 miles on it.
1. After reviewing the benefits (restore factory finish/protect of the wheels of a car that belongs to "hers") and risks (abandoning family for a few hours … that too on a Saturday) of the procedure I obtained informed consent from wife and kids.
2. Wheels were cleaned used P21S gel formula. I like this particular cleaner for several reasons most important of which is that it doesn't dry too fast and it safely removes brake dust without damaging the clear coat. Sonax although seems stronger (has a rotten egg smell to it and I use it for a little more stubborn brake dust).
3. Once dried with a microfiber towel, I clayed the wheels to remove any bonded contaminants on the surface.
4. Gently massaged a dollop of petroleum jelly (Vaseline) onto the anodized portion of wheels by hand (protected by vinyl gloves).
5. Buffed it down with a microfiber towel after taking off the excess with a terry towel.
6. While I was at it, the tires where cleaned with Griot’s garage rubber cleaner and dressed using their weatherproof non-silicone based UV protectant.
Impression on final results: Trouble is I usually don’t neglect my wheels to see a big before and after difference. As you can tell from the pictures, minor imperfections existed even on well cared for wheels. After the petroleum jelly application the wheels were restored to a factory fresh look. Over all it imparts a satin finish. Pictures 1,3 and 5 were pre and 2, 4 and 6 post vaseline application.
Only downside ... It's gonna cost me a trip to Macy's ....
(just kiddin ... one of the reasons I am able to splurge on stuff like cars, paint protection film, cleaning supplies is coz I've had a cheap date for 15 years)
1. After reviewing the benefits (restore factory finish/protect of the wheels of a car that belongs to "hers") and risks (abandoning family for a few hours … that too on a Saturday) of the procedure I obtained informed consent from wife and kids.
2. Wheels were cleaned used P21S gel formula. I like this particular cleaner for several reasons most important of which is that it doesn't dry too fast and it safely removes brake dust without damaging the clear coat. Sonax although seems stronger (has a rotten egg smell to it and I use it for a little more stubborn brake dust).
3. Once dried with a microfiber towel, I clayed the wheels to remove any bonded contaminants on the surface.
4. Gently massaged a dollop of petroleum jelly (Vaseline) onto the anodized portion of wheels by hand (protected by vinyl gloves).
5. Buffed it down with a microfiber towel after taking off the excess with a terry towel.
6. While I was at it, the tires where cleaned with Griot’s garage rubber cleaner and dressed using their weatherproof non-silicone based UV protectant.
Impression on final results: Trouble is I usually don’t neglect my wheels to see a big before and after difference. As you can tell from the pictures, minor imperfections existed even on well cared for wheels. After the petroleum jelly application the wheels were restored to a factory fresh look. Over all it imparts a satin finish. Pictures 1,3 and 5 were pre and 2, 4 and 6 post vaseline application.
Only downside ... It's gonna cost me a trip to Macy's ....
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
Last edited by w00tPORSCHE; 03-13-2011 at 07:24 PM.
The following users liked this post:
Qtrfoil (12-15-2022)