Replaced starter, now car cranks but no start
07-04-2010, 10:05 AM
#1
Burning Brakes
Thread Starter
Replaced starter, now car cranks but no start
What a day,
changed starter, now engine cranks and cranks but no firing off. Pulled a plug wire, got spark. Smells like I have gas going in.
All I have done is disconnect battery, determ starter/solenoid, remove and replace starter/solenoid, reconnect starter/solenoid, reconnect battery, crank...
I tried swapping the two yellow wires to make sure they were on the right spade terminals, but same results either way. Is there something I could have knocked loose during the process of removal/reinstall in that area that would cause this.
What am I missing?
changed starter, now engine cranks and cranks but no firing off. Pulled a plug wire, got spark. Smells like I have gas going in.
All I have done is disconnect battery, determ starter/solenoid, remove and replace starter/solenoid, reconnect starter/solenoid, reconnect battery, crank...
I tried swapping the two yellow wires to make sure they were on the right spade terminals, but same results either way. Is there something I could have knocked loose during the process of removal/reinstall in that area that would cause this.
What am I missing?
