Notices
911 Forum 1964-1989
Sponsored by:
Sponsored by: Intercity Lines, LLC

Advice on initial suspension set up 911sc

Thread Tools
 
Search this Thread
 
Old 03-09-2010, 03:27 PM
  #1  
Todd951968
Burning Brakes
Thread Starter
 
Todd951968's Avatar
 
Join Date: Nov 2004
Location: Pennsylvania
Posts: 793
Likes: 0
Received 1 Like on 1 Post
Default Advice on initial suspension set up 911sc

As an initial phase, I am installing 22/28 mm torsion bars, adjustable spring plates, polybronze for the spring plates and front control arms, bumpb steer kit, turbo tie rods, Bilstein Sports, polygraphite strut mounts and renewed brakes including calipers, rotors, braided lines, ATE fliud.

Is it OK to forgo sway bar upgrades until later? Eventually I plan on doing sways but for budgetary reasons, I want to hold off. I plan to track the car maybe once this year (I've tracked other cars but never a 911) and want it to be safe but don't necessarliy need to have a complete set up right now.

Any thoughts?
Old 03-09-2010, 03:36 PM
  #2  
Todd951968
Burning Brakes
Thread Starter
 
Todd951968's Avatar
 
Join Date: Nov 2004
Location: Pennsylvania
Posts: 793
Likes: 0
Received 1 Like on 1 Post
Default

Also, what size Weltmeister sways should I use, given my set up? - when I do get them.
Old 03-10-2010, 06:52 PM
  #3  
Kika
Nordschleife Master
 
Kika's Avatar
 
Join Date: Feb 2007
Location: Torrance, CA USA
Posts: 5,632
Received 80 Likes on 61 Posts
Default

You can install Carrera sway bars on an SC, it's been a while since I sold my SC 3 years ago, but I had Carrera sways put on my 80SC, they bolt right on. forget the sizes, I think you need to get 86+ Carrera bars.
Old 03-10-2010, 11:41 PM
  #4  
TroyN
Addict
Rennlist Member

 
TroyN's Avatar
 
Join Date: Jun 2003
Location: Boulder, CO
Posts: 2,303
Received 5 Likes on 5 Posts
Default

I would go with 29mm rear torsions vs. the 28s.



Quick Reply: Advice on initial suspension set up 911sc



All times are GMT -3. The time now is 09:17 PM.