TRE Boxster brake conversion kit
03-01-2010, 07:55 PM
#1
Drifting
Thread Starter
TRE Boxster brake conversion kit
I am selling a brand new never installed, direct bolt on brake caliper conversion kit for all 911 models up to 1989.This is the popular and well engineered TRE kit which comes complete with all the adaptors,mounting hardware,stainless brake lines and an excellent set of cleaned and repainted Brembo Red 986 front and 996 rear calipers from a 37,000 mile 2003 Boxster.They are a perfect matching set and they come with a brand new set of Porterfield R4S street pads.
This application fits 15 and 16 inch Porsche original wheels and is meant to be used with your stock original Carrera rotors.
This is not an "Ebay special" pieced together set but rather a professional plug and play upgrade to your existing brake system.This is an awesome street upgrade as far as performance and looks go.I picked up a nice set of 17 inch Fikse FM10's over the Winter and will be going in another direction with my brake upgrade ...
I'm looking for $1500.dollars as this kit cost me significantly more to piece together !
Best regards !
Phil
This application fits 15 and 16 inch Porsche original wheels and is meant to be used with your stock original Carrera rotors.
This is not an "Ebay special" pieced together set but rather a professional plug and play upgrade to your existing brake system.This is an awesome street upgrade as far as performance and looks go.I picked up a nice set of 17 inch Fikse FM10's over the Winter and will be going in another direction with my brake upgrade ...
I'm looking for $1500.dollars as this kit cost me significantly more to piece together !
Best regards !
Phil
Last edited by wildcat077; 01-23-2011 at 07:45 PM.
03-02-2010, 10:55 AM
#6
Burning Brakes
Why did you decide not to use it?
03-02-2010, 11:42 AM
#7
Drifting
Thread Starter
Guys,
Read the posts... lol
I mentioned in my second post that i was going with a 996TT setup because i purchased a set of 17 inch wheels over the Winter.These calipers are monoblocks and they can not be dissasembled so you have to clean,prime and mask carefully when you paint them.
Like Mussberger mentioned,he spent close to that on just the front wheels...
This is a good clean esay to install set and if i would have stayed with 16 inch wheels it would already be on my car !
I'll be out of town for the next few days so i will reply to all your requests by priority when i get back !
Cheers
Phil
Read the posts... lol
I mentioned in my second post that i was going with a 996TT setup because i purchased a set of 17 inch wheels over the Winter.These calipers are monoblocks and they can not be dissasembled so you have to clean,prime and mask carefully when you paint them.
Like Mussberger mentioned,he spent close to that on just the front wheels...
This is a good clean esay to install set and if i would have stayed with 16 inch wheels it would already be on my car !
I'll be out of town for the next few days so i will reply to all your requests by priority when i get back !
Cheers
Phil
Trending Topics
03-11-2010, 09:37 PM
#12
Drifting
Thread Starter
Ric,
I sold them to a buyer from Australia on Pelican...
He was one of the first seriously interested buyers but the sale was pending due to obvious shipping issues !
Regards !
Phil
I sold them to a buyer from Australia on Pelican...
He was one of the first seriously interested buyers but the sale was pending due to obvious shipping issues !
Regards !
Phil
