ToddMcF2002

I have several books (including the Wayne Dempsey book) but I'm still searching for a definative learning resource that goes over some of the other stuff such as exhaust, heat exchangers, ventilation, AC, ignition system and of course well labeled diagrams of the engine bay.

I guess I'm surprised to find out that it is easier to find detailed online info on a modern EVO than the much simpler NA 911. Maybe I'm just looking in the wrong places? Any help would be greatly appreciated.

Peter Zimmermann

Sounds like you're looking for a factory repair manual!

Amber Gramps

I've got a book by some nut job named Peter Zimmermann. It's funny how, in the book, my car, yes, my particular car, is the best 911 ever made.

Seriously now....

do you have a bentley? Between this board and that manual I don't know what esle you need.

BReyes

The online resources enable you to network on specific areas of interest. Dozens of books mostly covering the same information nevertheless are also important. So have your read Bruce Anderson's.

Regards,

whalebird

Bruce Anderson's "911 handbook" is considered a cornerstone referance on air cooled cars.

ToddMcF2002

I just did the Amazon thing and picked up Zimmermann's book plus Dempsey's 101 projects. I don't know about that Boxster content though


Nope on the Bentley. Do you have a link? I found this at autopartswarehouse. Is this the one?
1984-1989 Porsche 911 - Bentley Paper Repair Manual

Amber Gramps

http://www.automotion.com/product.as...dept%5Fid=4013

This is what 90% of us use.

http://www.autopartswarehouse.com/de...3-1600842.html

But this set would cover everything too

Ed Hughes

The Bentley is what you want for definitive information that will help you sort a car out. The others noted are more reference materials, although they are good too.

Ultimately, when its all said and done, you should have a shelf of books. I do, and I get into most of them regularly.

Helios59

This one's a bit pricey, but it's a wealth of information.
Lots of pretty pictures, too.

http://www.amazon.com/Porsche-911-3-...2830190&sr=1-2

May not be technical enough for you, but it's still good reading and I don't find it mentioned a lot.

rusnak

You could, but probably would not need, the factory workshop manual that they sold to their dealership service centers. The set that covers model year 84-89 911 Carrera is a 5 volume set, Porsche part # WKD482020. You can order it from your local Porsche dealer, or any retailer that sells Porsche parts.

ToddMcF2002

Thanks everyone for the great info. I've got the Bentley's now (72 - 89). Lots of reading to do! I can see the trap already though. A winter engine rebuild project gets delayed and the next thing you know your car is off the road for 2 years. How many of you have a spare engine around for a casual rebuild?

rusnak

I can sell you a spare 2.0 liter block that I have. I was going to use it to practice assembly disassembly and deck height measurements, cam timing etc before doing it for real on my 3.2. But it would be better for you to buy a local junk engine though, then tools, engine yoke, etc etc.

MUSSBERGER

I consider the Haynes manual to be best.

I also believe that victory sells the nicest cars and motor meister is tops for all your Porsche motor needs.

ToddMcF2002

LOL I may be a noob but Meister is a dead giveaway! Haynes manuals...sheesh!

rusnak

Todd, just take your time and build up your book collection. Ask a lot of questions here an on the Pelican board. Be aware that there is a lot of bad advice out there. I'm sure I've contributed my share. Try to allow others to disagree with you but try to learn from them.