Is my numbers correct?
12-04-2008, 11:37 AM
Race Car
Thread Starter
Join Date: Aug 2006
Location: San Antonio, TX
Posts: 4,978
Likes: 0
Is my numbers correct?
I calculated that when I went from 3rd @ 6500-7000 RPM to 2nd on the "money shift", I probably hit in the high 8,000's to 9,100.
I found the stock G-50 gear ratios from Powerhaus II but I was not sure if they were correct because some ratios did not say "stock" next to it.
Is this correct? High 8k's to low 9k's.
12-04-2008, 12:17 PM
Burning Brakes
Join Date: Mar 2002
Location: Greensboro, NC
Posts: 918
Likes: 0
Quote:
Originally Posted by
Tippy
I calculated that when I went from 3rd @ 6500-7000 RPM to 2nd on the "money shift", I probably hit in the high 8,000's to 9,100.
....Is this correct? High 8k's to low 9k's.
RPMs or Dollars
? Sorry, I just had to...
Keith
'88 CE coupe
12-04-2008, 12:55 PM
Race Car
Thread Starter
Join Date: Aug 2006
Location: San Antonio, TX
Posts: 4,978
Likes: 0
Quote:
Originally Posted by
KC911
RPMs or Dollars
? Sorry, I just had to...
Keith
'88 CE coupe
I hate you
12-04-2008, 03:26 PM
uninformed gas bag (contemplating on whether gas bag is one or two words)Rennlist Member
Join Date: Dec 2006
Location: Melbourne Beach
Posts: 20,514
Sounds right to me but Steve,Pete, or Jack will probably chime in with a more definitive answer.
12-04-2008, 03:38 PM
Race Car
Thread Starter
Join Date: Aug 2006
Location: San Antonio, TX
Posts: 4,978
Likes: 0
Quote:
Originally Posted by
MUSSBERGER
Sounds right to me but Steve,Pete, or Jack will probably chime in with a more definitive answer.
Thanks, I just calculated the gear ratio difference and then times that of the RPM.
Just making sure that is about what is normal and if I was correct.
12-04-2008, 07:24 PM
Rennlist Member
Join Date: Jun 2008
Location: Brockville, ON
Posts: 1,195
Likes: 0
The secret to bending the valve is to realize there is no valve.
12-04-2008, 08:20 PM
uninformed gas bag (contemplating on whether gas bag is one or two words)Rennlist Member
Join Date: Dec 2006
Location: Melbourne Beach
Posts: 20,514
12-04-2008, 09:04 PM
Race Car
Thread Starter
Join Date: Aug 2006
Location: San Antonio, TX
Posts: 4,978
Likes: 0
Quote:
Originally Posted by
irobertson
The secret to bending the valve is to realize there is no valve.
12-05-2008, 12:25 AM
Rennlist Member
Join Date: Jun 2008
Location: Brockville, ON
Posts: 1,195
Likes: 0
Quote:
Originally Posted by
Tippy
Just a reference to the movie "The Matrix"
12-05-2008, 09:26 AM
Race Car
Thread Starter
Join Date: Aug 2006
Location: San Antonio, TX
Posts: 4,978
Likes: 0
Quote:
Originally Posted by
irobertson
Just a reference to the movie "The Matrix"
Ah ha, in a Keanu Reeves voice I take it.....