New seats, need some help
#1
Instructor
Thread Starter
Join Date: Feb 2006
Location: Boulder, Colorado
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
New seats, need some help
Yesterday, I bought a set of really nice seats from an 89 944 turbo. the car got turned into a race car, a few years back so they have been sitting collecting dust. Problem is they are power seats.
I have a 1975 911S Targa. There is nothing for a power seat, and the manual makes no mention of it. Therefore I came to the conclusion that there are no power seats for this year.
From what I can guess, there needs to be a relay for the seat in the relay area, and then there needs to be wires run to connect the two. There are a few questions that I would need answered.
1.) Does there need to be a relay, or can it be hooked straight to power.
2.) Would I absolutely need to buy the special shaped connector or can I splice different connectors that do the same job?
3.) If i can't use the motors, can I possibly take them out and install the sliders off the old seats.
Thanks in advance.
-Nick
I have a 1975 911S Targa. There is nothing for a power seat, and the manual makes no mention of it. Therefore I came to the conclusion that there are no power seats for this year.
From what I can guess, there needs to be a relay for the seat in the relay area, and then there needs to be wires run to connect the two. There are a few questions that I would need answered.
1.) Does there need to be a relay, or can it be hooked straight to power.
2.) Would I absolutely need to buy the special shaped connector or can I splice different connectors that do the same job?
3.) If i can't use the motors, can I possibly take them out and install the sliders off the old seats.
Thanks in advance.
-Nick