Air Box Replacement Guide
#16
Team Owner
Thread Starter
Thanks guys
Jay in one of the pics you will see a piece of wood with black marker on it . i made a template when i took the assembly out . so when I rebuilt it i alligned the runners to fit in the template, and got down real low to see if they were flat. This got me VERY close.
The two runners for 1 and 4 you can leave loose at the rubber sleeve and they will self align. you can tighten them after. the other 4 if you get close you will be fine, the rubber has some give but the closer you can get the better obviously.
Yeah Steve I have to get the mixture set but i imagine it is VERY close. It starts and idles beautifully.
The best part of the whole project was putting on the copper nuts i got for the intake .. they look great .. oh well I guess i am superficial...lol
as I said if any of you want any high res pics for projects or trouble shooting shoot me your email . I have tonnes of pics not even shown here ..
again thanks greatly to Pete and John for their help with this project .. PS i am such a poseur ,, take me helmet to the track and just watch ....
Jay in one of the pics you will see a piece of wood with black marker on it . i made a template when i took the assembly out . so when I rebuilt it i alligned the runners to fit in the template, and got down real low to see if they were flat. This got me VERY close.
The two runners for 1 and 4 you can leave loose at the rubber sleeve and they will self align. you can tighten them after. the other 4 if you get close you will be fine, the rubber has some give but the closer you can get the better obviously.
Yeah Steve I have to get the mixture set but i imagine it is VERY close. It starts and idles beautifully.
The best part of the whole project was putting on the copper nuts i got for the intake .. they look great .. oh well I guess i am superficial...lol
as I said if any of you want any high res pics for projects or trouble shooting shoot me your email . I have tonnes of pics not even shown here ..
again thanks greatly to Pete and John for their help with this project .. PS i am such a poseur ,, take me helmet to the track and just watch ....
Last edited by theiceman; 01-09-2013 at 10:14 AM.
#24
Team Owner
Thread Starter
it is an bumper plug, Take it off and there is a whole you fasten the eyelet from the tool kit thriugh to the frame. you can use it to fasten the car down or pull it on to a flat bed I imagine.
#30
Team Owner
Thread Starter