Brakes
08-12-2001 | 06:36 PM
#1
Thread Starter
4th Gear
Joined: Aug 2001
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Brakes
I just pulled the calipers off my 74 911 to get them rebuilt, and want to confirm what I think I've got on this car (I read Anderson's book):
Fronts were 48mm pistons (as close as I could measure them without removing the pistons from the caliberp). Left was marked 19G and 26G. Clearly marked as ATE calipers. I think these are the A calipers
Rears were ATE 38mm pistons - left was marked P56 and P25. I think these are the M type calipers with the smaller pistons (pre 85 or so)
Both are clearly steel not aluminum or alloy.
Thanks for the help in advance.
Fronts were 48mm pistons (as close as I could measure them without removing the pistons from the caliberp). Left was marked 19G and 26G. Clearly marked as ATE calipers. I think these are the A calipers
Rears were ATE 38mm pistons - left was marked P56 and P25. I think these are the M type calipers with the smaller pistons (pre 85 or so)
Both are clearly steel not aluminum or alloy.
Thanks for the help in advance.
