Fuel Injector Sleeve O-ring, 911SC
08-05-2002, 08:40 AM
#1
Cruisin'
Thread Starter
Join Date: Jul 2002
Location: Drammen, Norway
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Fuel Injector Sleeve O-ring, 911SC
Hi all!
Just a short question if anyone knows the answer to it...
For the record i got a 1978 model 911SC.
I need new O-ring to the fuel injector sleeve. Due to certain circumstances i just wondered if i could get new O-rings like this in other places than a Porsche dealer... Part number??
cheers,
~eJensen~
Just a short question if anyone knows the answer to it...
For the record i got a 1978 model 911SC.
I need new O-ring to the fuel injector sleeve. Due to certain circumstances i just wondered if i could get new O-rings like this in other places than a Porsche dealer... Part number??
cheers,
~eJensen~
08-05-2002, 10:00 AM
#2
If you don't mind ordering from the USA, you can try the following link to Pelican Parts on-line catalog:
<a href="http://www.pelicanparts.com/catalog/shopcart/911M/por_911M_FUELCI_main.htm" target="_blank">http://www.pelicanparts.com/catalog/shopcart/911M/por_911M_FUELCI_main.htm</a>
Pelican's catalog looks like it has the part you need.
Regards, Bruce
<a href="http://www.pelicanparts.com/catalog/shopcart/911M/por_911M_FUELCI_main.htm" target="_blank">http://www.pelicanparts.com/catalog/shopcart/911M/por_911M_FUELCI_main.htm</a>
Pelican's catalog looks like it has the part you need.
Regards, Bruce
08-05-2002, 05:20 PM
#5
Advanced
Join Date: Jul 2001
Location: Olney, MD
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
The O-ring is not a very expensive part - even from a porsche dealer. Regardless, I've recently replaced the CIS injector O-rings in both my 911SC and Audi 4000 Quattro - they sure looked like the same part to me. I can't cross-reference part numbers but I'll bet there's an equivalent VW or Audi part.
