Drivers' side front keeps settling at same ride height.
#1
Racer
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I've been trying to no avail to up my left front ride height by approx. 1/2". I know about indexing the torsion bars and the adjustment screw setting and the car has new Bistein HDs. I have inspected the adjustment lever and bolt as well as the torsion bar splines.
I can get the right height initially, but a quick drive around the block always has it settling back at a too low 24.5".
I assume if the torsion bar was cracked the suspension would collapse. Any ideas?
I can get the right height initially, but a quick drive around the block always has it settling back at a too low 24.5".
I assume if the torsion bar was cracked the suspension would collapse. Any ideas?
#2
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Do you have an aftermarket front sway bar? I find that on stock cars the ride height is easy to set, but on cars where the customer has stiffer suspension and a big sway bar, it can be a huge pain in the *** to get it just right, last time I did it on a street/track car it literally took about 20 tries, but i eventually got it.
---
Chris Andropoulos
Schneider Autohaus
Santa Barbara, CA
---
Chris Andropoulos
Schneider Autohaus
Santa Barbara, CA