msd 911sc installation
08-14-2006, 10:33 PM
#1
8th Gear
Thread Starter
Join Date: May 2006
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
msd 911sc installation
I need help!!,
I am a bit lost on getting my MSD 6AL system to work. I hooked everything according to the instruction but still no spark. I connected the large red wire to the hot side of the starter, the black to chassis ground and the red to the red wire out of the original red wire that was plugged into the factory cd box. I have a white wire remaining and a plug on the other side of the msd unit., which I assume is for my tach adapater. Does the white wire plug into green wire comming out of my distrubutor? or ?
Any help would be greatly appreciated
Thank you.
I am a bit lost on getting my MSD 6AL system to work. I hooked everything according to the instruction but still no spark. I connected the large red wire to the hot side of the starter, the black to chassis ground and the red to the red wire out of the original red wire that was plugged into the factory cd box. I have a white wire remaining and a plug on the other side of the msd unit., which I assume is for my tach adapater. Does the white wire plug into green wire comming out of my distrubutor? or ?
Any help would be greatly appreciated
Thank you.
08-15-2006, 03:33 AM
#2
Drifting
Join Date: Feb 2006
Location: Elk Grove, California
Posts: 2,647
Likes: 0
Received 2 Likes
on
2 Posts
There's a discussion on the MSD over on the 930 board...you might try doing a forum search for MSD there...also, there's a forum for MSD itself...do a google search on MSD and you can join their forum and ask their techs, and they also have a FAQ site...but they were not very responsive to me. In short, their PR was "noticeably deficient".....
