Machinist recommendations, New England area
12-29-2001 | 11:23 AM
#1
Thread Starter
Addict
Rennlist
Lifetime Member
Rennlist
Lifetime Member
Joined: May 2001
Posts: 222
Likes: 2
From: Nashua, NH USA
Machinist recommendations, New England area
Hi everyone,
I'm looking for a machinist familiar with 911 engines, preferably in NH/Mass or at least the East Coast. I need someone to rebush rockers arms and rebuild connecting rods. I have a great guy for doing heads already.
TIA,
Chris
I'm looking for a machinist familiar with 911 engines, preferably in NH/Mass or at least the East Coast. I need someone to rebush rockers arms and rebuild connecting rods. I have a great guy for doing heads already.
TIA,
Chris
12-29-2001 | 06:41 PM
#3
Thread Starter
Addict
Rennlist
Lifetime Member
Rennlist
Lifetime Member
Joined: May 2001
Posts: 222
Likes: 2
From: Nashua, NH USA
Thanks James,
I suppose I should clarify. I'm looking for a machinist of machine shop. Your's is the 2nd recommendation I've received for 911 mechanic/engine builder. These shops send their parts out to a machinist to have the machining done.
Chris
P.S. EPE and Jerry are great.
I suppose I should clarify. I'm looking for a machinist of machine shop. Your's is the 2nd recommendation I've received for 911 mechanic/engine builder. These shops send their parts out to a machinist to have the machining done.
Chris
P.S. EPE and Jerry are great.
12-31-2001 | 01:47 PM
#5
Racer
Joined: Dec 2001
Posts: 375
Likes: 30
From: Glen Allan, ON
Chris
Try Import Machine in Framingham,MA shop is run by Dana Johnson. Does excellent work and is a very nice guy to boot. He did a set of 964 heads for me this fall. It is also the shop that EPE uses for all their race and street work. His number is 508-872-RACE he has a web site at www.intekra.com/ims
Hope this helps
Try Import Machine in Framingham,MA shop is run by Dana Johnson. Does excellent work and is a very nice guy to boot. He did a set of 964 heads for me this fall. It is also the shop that EPE uses for all their race and street work. His number is 508-872-RACE he has a web site at www.intekra.com/ims
Hope this helps
12-31-2001 | 07:33 PM
#6
Intermediate
Joined: Dec 2001
Posts: 32
Likes: 0
From: Metro West Boston
Another topic but maybe of interest to you eastern New Englanders...
I had an excellent alignment done by Casey Snow at Snow's Garage, Framingham, (508) 875-4216 - $69.
I had my AC brought back from an early grave by Dave Cote - Cote Automotive, Holliston, (508) 429-5328. I bought the parts. Dave did the evac, install, and recharge. 45 degrees on a 90 degree day. Not bad.
Both are great people. Actually, I have only met great people in the porsche community around here.
Have a nice New Year.
CL, 86' Carrera Coupe
I had an excellent alignment done by Casey Snow at Snow's Garage, Framingham, (508) 875-4216 - $69.
I had my AC brought back from an early grave by Dave Cote - Cote Automotive, Holliston, (508) 429-5328. I bought the parts. Dave did the evac, install, and recharge. 45 degrees on a 90 degree day. Not bad.
Both are great people. Actually, I have only met great people in the porsche community around here.
Have a nice New Year.
CL, 86' Carrera Coupe
