Vdm9

Hello all
Need shop recommendations for transmission rebuild preferably on Long Island NY or Tri state area.
Thank you
vdm

Spyerx

If you want a focused transmission shop that is very good at what they do, Brian Copans or Bill Rader motorsports. Pull the trans, put it in a large cooler, ship it, and have them rebuild it. I've used Rader on a few occasions, highly recommended. They are fast, and good, they also have the equipment to bench test the operation before they ship these out.

Vdm9

Thank you!!!

I called them and will move forward with service

Many thanks!!!

old man neri

Out of curiosity, what happened that you required a G50 to be rebuilt?

Pavegeno928

Am having my Porsche mechanic open up my transmission to take a look at 1st and 2nd as well as some sloppiness that I perceive in the linkage. Would be interested to hear about your experience and cost.

Mark Salvetti

I realize you guys are looking for shops, and I don't blame you. Seems like a lot of DIY success with the 915, but not too many people try to rebuild a G50 in their garage.

But having said that, there is a great ongoing thread over at Pelican with a DIY G50 rebuild, including adding a Guard limited slip: http://forums.pelicanparts.com/porsc...build-g50.html

Mark