Notices
911 Forum 1964-1989
Sponsored by:
Sponsored by: Intercity Lines, LLC

Brake question??

Thread Tools
 
Search this Thread
 
Old 02-12-2004, 10:19 AM
  #1  
emac
Racer
Thread Starter
 
emac's Avatar
 
Join Date: Apr 2002
Location: Hammond In.
Posts: 305
Likes: 0
Received 0 Likes on 0 Posts
Default Brake question??

Need some help

Does anyone know where I could buy a (PCC B Brake System)
this has the 15" Rotor 8 piston caliper.

Thanks in advance.
Old 02-12-2004, 10:28 AM
  #2  
Noel
Rennlist Member
 
Noel's Avatar
 
Join Date: Jul 2001
Location: Asheville, NC
Posts: 796
Likes: 0
Received 7 Likes on 6 Posts
Default

There are a few Porshce dealers who advertise in Pano and Excellence that offer them. I think they are in the neighborhood of $16,000. I would be surprised if you can retro-fit them to an SC. A 930 brake system can be used with standard 16" wheels and offers exceptional braking. A few have also added Big Red from a 993 twin turbo. Both of these would run close to about $2,000 to 3,000.

D a search on the Pelican parts discussion board, there is a lot of good info that will help you out.

Good luck.

Noel
Old 02-12-2004, 12:18 PM
  #3  
GrantG
Addict
Rennlist Member

 
GrantG's Avatar
 
Join Date: Jun 2002
Location: Denver
Posts: 18,057
Received 4,978 Likes on 2,816 Posts
Default

Do some research before you buy the PCCB's - lots of people hate them! They offer no improvement in stopping distance, they overheat badly and disintegrate with heavy track use and they are noisy and ineffective when cold. They do cut unsprung weight alot, but only if you already have huge steel brakes (like on TT, GT2, GT3). The rotors also wear out far quicker than steel brakes (despite the claims) and cost five figures to replace.

Do a search on www.rennteam.com and search for PCCB



Quick Reply: Brake question??



All times are GMT -3. The time now is 09:19 AM.