distributor shaft doesnt fit
10-21-2017 | 12:01 PM
#16
Team Owner
Joined: Aug 2005
Posts: 27,237
Likes: 1,180
From: Cambridge Ontario Canada
I agree with GT
you may have been sold a 2.7 displacement engine. But larger displacement engines that start life as smaller is not uncommon.
2.2 to 2.7 seems like a large jump and Steve could tell us if it is feasible.
It certainly looks however that it is in upgraded 2.2 case.
you may have been sold a 2.7 displacement engine. But larger displacement engines that start life as smaller is not uncommon.
2.2 to 2.7 seems like a large jump and Steve could tell us if it is feasible.
It certainly looks however that it is in upgraded 2.2 case.
10-21-2017 | 02:09 PM
#17
RL Technical Advisor
Joined: May 2001
Posts: 11,871
Likes: 66
From: Portland Oregon
I've done quite a number of 2.0-2.2 to 2.7 conversions over the years so this is not uncommon at all. 
You can ID the case by its Type numbers and serial numbers. Nikasil & Alusil 90mm cylinders can be ID'ed by examining the numbers at the base of the cylinders.
You can ID the case by its Type numbers and serial numbers. Nikasil & Alusil 90mm cylinders can be ID'ed by examining the numbers at the base of the cylinders.
