mark kibort

http://www.youtube.com/watch?v=RPo6i...eature=related

hacker-pschorr

Oh, I like that.....a lot!!!!

Ducman82

neat!

pcar928fan

Might be a cheaper way to get HP than bore and stroke on a 928 motor...

Ducman82

not chevy cheap....

UncleMaz

Check out this one from the same digifolio: http://www.youtube.com/watch?v=j4s5wKQDoQ4&NR=1

pcar928fan

no, no, you are right about that for sure! But probably not the $30k+ that it would cost to get a GOOD bore and stroke on a 928 engine though!

But, yea, a Turbo, S/C or Chevy conversion would be cheaper than an M3 V8 for sure!

Ducman82

that sounds like a good motor. i have such big dreams for building a motor.... got euro 16v heads, ill get them done up. but for a block, the two i got have issues.... but ill be damned if im going to stick a non porsche engine in it... :-)

hacker-pschorr

That depends on how much power you want to make.

If you want one that lasts, you start here:
http://www.katechengines.com/street_...e_packages.php

Friend of mine has a Katech 427 in his ZO6, it wasn't the first motor he dropped in there, but so far it's the only one that has survived track use.

kccampro

ohhhh... now we're talking, I have a 928 with no engine and an M5 sitting next to it. I wonder if my wife would notice.

dprantl

I wonder what the transmission in there is? Probably stock with a bellhousing adapter for the front of the TT.

Dan
'91 928GT S/C 475hp/460lb.ft

hacker-pschorr

"We've secretly switched out his wife's M5 engine for a Chevy crate motor....."

Sounds like a Folgers commercial

justaguy

Cool,Very cool. 525 HP?

EspritS4s

Very cool, but I'd rather have a Vette motor. A German ($$$$) engine transplant seems like double the folly unless you happen to just have one laying around.

ubercooper

Not the most cost effective option, but fun none the less.