FS: Body Parts
#4
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi John,
I'd rather receive offers than quote prices, quite frankly. I just checked International's website and they're listing hoods for $400 and door shells without components for $375 each, if that helps you to consider what they are worth to you.
I'll PM you my phone number. Call me to discuss.
Thanks,
Kevin
I'd rather receive offers than quote prices, quite frankly. I just checked International's website and they're listing hoods for $400 and door shells without components for $375 each, if that helps you to consider what they are worth to you.
I'll PM you my phone number. Call me to discuss.
Thanks,
Kevin
#5
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Andrew Olson
You also need to be a member to post FS items,
I know, and I am a member (see the note to Admin at the bottom of my listing). I've sent a couple of emails to Admin asking to have my sig fixed, but I have heard around here that they are very busy, and they haven't gotten around to me yet, so I didn't want to harass them about it. Figure, this way, if they see the problem, maybe they'll fix it for me when they have a minute.
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
#6
Supercharged
Rennlist Member
Rennlist Member
Join Date: May 2002
Location: Back in Michigan - Full time!
Posts: 18,925
Likes: 0
Received 61 Likes
on
35 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Privt666
Hi Andrew,
I know, and I am a member (see the note to Admin at the bottom of my listing). I've sent a couple of emails to Admin asking to have my sig fixed, but I have heard around here that they are very busy, and they haven't gotten around to me yet, so I didn't want to harass them about it. Figure, this way, if they see the problem, maybe they'll fix it for me when they have a minute.![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
I know, and I am a member (see the note to Admin at the bottom of my listing). I've sent a couple of emails to Admin asking to have my sig fixed, but I have heard around here that they are very busy, and they haven't gotten around to me yet, so I didn't want to harass them about it. Figure, this way, if they see the problem, maybe they'll fix it for me when they have a minute.
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
#7
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Andrew Olson
Sorry, didn't see that. ![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
Kevin
1984 Euro Auto 16v
Trending Topics
#9
Nordschleife Master
Join Date: Sep 2004
Location: Not close enough to VIR.
Posts: 9,429
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Too bad the fenders are US...
I have a spare LH for an 84 Euro, but I'm not sure I want to let it go. You can use 85-86 US brains. They supposedly run the engine a little richer which may be good for your SC. You can also get the chips in them reprogrammed to match an 84-86 Euro. John Speake did that for Normy.
BTW, if you use the 85-86 US brains with stock chips, you can run an O2 loop. Converting to 84-86 Euro chips will disable the O2 capability.
I have a spare LH for an 84 Euro, but I'm not sure I want to let it go. You can use 85-86 US brains. They supposedly run the engine a little richer which may be good for your SC. You can also get the chips in them reprogrammed to match an 84-86 Euro. John Speake did that for Normy.
BTW, if you use the 85-86 US brains with stock chips, you can run an O2 loop. Converting to 84-86 Euro chips will disable the O2 capability.
#14
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The car no longer exists as shown. It's already in little teeny tiny pieces in my basement and along the side of my garage. The motor had a major meltdown and started blowing oil everywhere, and anyway, it had serious frame and floor damage. I was unable to find a replacement motor when that happened, and through one thing and another, I ended up buying Carl Fausett's 84 Euro to replace it. I put all of my good parts from the white car onto the Euro (those that would cross over), and now I'm basically left with a bunch of good US body parts that don't go on a Euro. The next thing you'll ask is why I didn't keep the white car until I found a suitable donor motor or something. If you look closely at the driveway under the car, you'll see it's two concrete runners with a grass strip in the middle. The driveway is only 30 feet long, and the garage is a tiny barely-one-car garage. I simply don't have the space for a third vehicle, between mine and my wife's SUV.
So don't feel bad about cannibalizing it...feel bad that the S/C'd Euro isn't running for no apparent freaking reason, and I need BRAINS!! I think.![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Make me an offer, people!!
Kevin
So don't feel bad about cannibalizing it...feel bad that the S/C'd Euro isn't running for no apparent freaking reason, and I need BRAINS!! I think.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Make me an offer, people!!
Kevin
#15
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
You still need to list an asking price for each part if you want this topic to stay.
Please read thru the entire New Visitor...FAQ toipic posted at the top of this forum.
Thanks.
Please read thru the entire New Visitor...FAQ toipic posted at the top of this forum.
Thanks.