Traqsync Pro?
#1
I'm in....
Rennlist Member
Rennlist Member
Thread Starter
Traqsync Pro?
Santa brought me a new GoPro Hero 2 for Christmas. Where can I find the Traqsync module / cable to connect it to my Traqmate? All I have found are packeges including the TM or the camera.
#3
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 18,689
Received 2,847 Likes
on
1,675 Posts
Or, if you don't need all the inputs provided by the TraqData Pro I/O box, just need an RPM input and a connection to control the camera, I'll sell you a TraqSync Pro cable for $129. Do you have TraqStudio, the software to put them together?
__________________
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
Last edited by ProCoach; 12-25-2012 at 03:43 PM.
#4
I'm in....
Rennlist Member
Rennlist Member
Thread Starter
Does the cable alone start / stop the camera with the traqmate?
#5
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 18,689
Received 2,847 Likes
on
1,675 Posts
Yes.
A DB-15 male connector goes into the back of the sensor unit, has a 15" cord going to a RJ-45 male with a single 20 gauge blue lead for an RPM lead pigtailed off the DB-15 plug.
The kit includes an RJ-45 female to female connector and a 10' cable that is an RJ-45 male to a 30-pin iPhone/iPod/iPad male plug that goes into the back of the GoPro.
This is the same assembly from Traqmate that is included in the TraqDash Complete Pro. Not available separately from TM.
A DB-15 male connector goes into the back of the sensor unit, has a 15" cord going to a RJ-45 male with a single 20 gauge blue lead for an RPM lead pigtailed off the DB-15 plug.
The kit includes an RJ-45 female to female connector and a 10' cable that is an RJ-45 male to a 30-pin iPhone/iPod/iPad male plug that goes into the back of the GoPro.
This is the same assembly from Traqmate that is included in the TraqDash Complete Pro. Not available separately from TM.
#6
I'm in....
Rennlist Member
Rennlist Member
Thread Starter
Thanks Peter. Sounds like exactly what I need. I have all the inputs I need to my AIM, Just not GPS and HD camera support. Thats all I really want the traqmate for anyway. I'll send you a PM.
.
Scott
.
Scott