Cayenne Turbo misfire
#1
Instructor
Thread Starter
Cayenne Turbo misfire
After replacing my cracked turbo, I am still getting these errors and a misfire.
The car has been twice to my local stealership and both times they didn't bother to correctly diagnose it. They just looked at the coil packs and said they are old, need changing. However they are new old stock and the fault does NOT move if I switch the coil packs with known good firing cylinders. The fault is always with cylinder 3.
Could this be injectors or something more ominous, eg low compression or valve problems?
Bosch Digital Motor Electronics 7.1.1
Current Fault Codes
P0016:
Crankshaft Position. Camshaft Pos. Correlation Bank 1 Sensor A - Value below lower limit value, test conditions are not-completed, fault is not currently active and is not causing a DTC light
P0300:
Random/Multiple Cylinder Misfire Detected - Implausible signal, test conditions are not-completed, fault is not currently active and is not causing a DTC light
P0303:
Cylinder 3 Misfire Detected - Implausible signal, test conditions are not-completed, fault is not currently active and is not causing a DTC light
The car has been twice to my local stealership and both times they didn't bother to correctly diagnose it. They just looked at the coil packs and said they are old, need changing. However they are new old stock and the fault does NOT move if I switch the coil packs with known good firing cylinders. The fault is always with cylinder 3.
Could this be injectors or something more ominous, eg low compression or valve problems?
Bosch Digital Motor Electronics 7.1.1
Current Fault Codes
P0016:
Crankshaft Position. Camshaft Pos. Correlation Bank 1 Sensor A - Value below lower limit value, test conditions are not-completed, fault is not currently active and is not causing a DTC light
P0300:
Random/Multiple Cylinder Misfire Detected - Implausible signal, test conditions are not-completed, fault is not currently active and is not causing a DTC light
P0303:
Cylinder 3 Misfire Detected - Implausible signal, test conditions are not-completed, fault is not currently active and is not causing a DTC light
#2
Have you tried to replace the crankshaft position sensor? Looks like to me that the codes are pointing to it. All the other codes may be a secondary effect from it not working right.
After replacing my cracked turbo, I am still getting these errors and a misfire.
The car has been twice to my local stealership and both times they didn't bother to correctly diagnose it. They just looked at the coil packs and said they are old, need changing. However they are new old stock and the fault does NOT move if I switch the coil packs with known good firing cylinders. The fault is always with cylinder 3.
Could this be injectors or something more ominous, eg low compression or valve problems?
Bosch Digital Motor Electronics 7.1.1
Current Fault Codes
P0016:
Crankshaft Position. Camshaft Pos. Correlation Bank 1 Sensor A - Value below lower limit value, test conditions are not-completed, fault is not currently active and is not causing a DTC light
P0300:
Random/Multiple Cylinder Misfire Detected - Implausible signal, test conditions are not-completed, fault is not currently active and is not causing a DTC light
P0303:
Cylinder 3 Misfire Detected - Implausible signal, test conditions are not-completed, fault is not currently active and is not causing a DTC light
The car has been twice to my local stealership and both times they didn't bother to correctly diagnose it. They just looked at the coil packs and said they are old, need changing. However they are new old stock and the fault does NOT move if I switch the coil packs with known good firing cylinders. The fault is always with cylinder 3.
Could this be injectors or something more ominous, eg low compression or valve problems?
Bosch Digital Motor Electronics 7.1.1
Current Fault Codes
P0016:
Crankshaft Position. Camshaft Pos. Correlation Bank 1 Sensor A - Value below lower limit value, test conditions are not-completed, fault is not currently active and is not causing a DTC light
P0300:
Random/Multiple Cylinder Misfire Detected - Implausible signal, test conditions are not-completed, fault is not currently active and is not causing a DTC light
P0303:
Cylinder 3 Misfire Detected - Implausible signal, test conditions are not-completed, fault is not currently active and is not causing a DTC light