993 Twin turbo 3.8 conversion
#31
Drifting
Sand_man, here's a link that explains the reason for welding the heads, Cheers M
http://forums.pelicanparts.com/911-e...g-engines.html
In my case I removed the second fin and welded solid.
http://forums.pelicanparts.com/911-e...g-engines.html
In my case I removed the second fin and welded solid.
#40
Did you build the IC design with access to take it off once is installed in the car the whole engine/IC for future troubleshooting? Looks like it's going to take some small hands and patience to make it happen.
#41
Rennlist Member
Very nice! Are those turbo drain reservoirs a stock 993 turbo part?
#45
Instructor
Thread Starter
Turbo intake lines will be ran through the back seat wall into the cab. Will use K&N cone filters for now but the final product will be rear side window intake lines and a filter boxes.
I used flex hose for the intake lines wrapped with Fiber Fix for protection under the engine tray (5min and the wrap was hard like cement ).
I used flex hose for the intake lines wrapped with Fiber Fix for protection under the engine tray (5min and the wrap was hard like cement ).
Last edited by White911TTOne; 03-29-2016 at 12:26 PM.