993 Rebuild & More
02-11-2016, 08:35 PM
Rennlist Member
Thread Starter
Join Date: Nov 2011
Location: Saskatoon SK Canada
Posts: 807
chain cover again
Attached Images
02-11-2016, 08:37 PM
Rennlist Member
Thread Starter
Join Date: Nov 2011
Location: Saskatoon SK Canada
Posts: 807
to secure the crank from moving i bolt on a peace of flat iron
Attached Images
02-11-2016, 08:38 PM
Rennlist Member
Thread Starter
Join Date: Nov 2011
Location: Saskatoon SK Canada
Posts: 807
my handy pipe for an extension
Attached Images
02-11-2016, 08:39 PM
Intermediate
Join Date: Oct 2010
Posts: 42
Likes: 0
Quote:
Originally Posted by
Enso
to secure the crank from moving i bolt on a peace of flat iron
What is the part number on that tool you're using? ;-)
02-11-2016, 08:40 PM
Rennlist Member
Thread Starter
Join Date: Nov 2011
Location: Saskatoon SK Canada
Posts: 807
to remove the other exhaust bolts i use this 13 U joint id have a hard time taking them off with out it
Attached Images
02-11-2016, 08:42 PM
Rennlist Member
Thread Starter
Join Date: Nov 2011
Location: Saskatoon SK Canada
Posts: 807
number 6 exhaust looks pretty gunggy
02-11-2016, 08:45 PM
Rennlist Member
Thread Starter
Join Date: Nov 2011
Location: Saskatoon SK Canada
Posts: 807
Quote:
Originally Posted by
oscillon
What is the part number on that tool you're using? ;-)
i think its a 3/4 pipe handle from a bicycle ...hope that helps
03-18-2016, 01:55 PM
Rennlist Member
Thread Starter
Join Date: Nov 2011
Location: Saskatoon SK Canada
Posts: 807
I've stared with the cleaning process, this always takes a while
you can see i found a boot cracked
03-18-2016, 02:01 PM
Rennlist Member
Thread Starter
Join Date: Nov 2011
Location: Saskatoon SK Canada
Posts: 807
03-19-2016, 02:03 PM
Drifting
Join Date: Apr 2008
Location: Calgary, Alberta
Posts: 2,650
Likes: 0
You better get this finished; the good weather's here!
03-19-2016, 02:49 PM
Rennlist Member
Join Date: Jun 2010
Posts: 538
Likes: 0
Quote:
Originally Posted by
Rinty
You better get this finished; the good weather's here!
Still snow on the ground here in Wpg.
Curious, how many 993's in Saskatoon? I think there are only 8 here.
Really like to see the progress. Are your heads going to Steve W?
03-19-2016, 03:47 PM
Rennlist Member
Thread Starter
Join Date: Nov 2011
Location: Saskatoon SK Canada
Posts: 807
Quote:
Originally Posted by
Seamless
Still snow on the ground here in Wpg.
Curious, how many 993's in Saskatoon? I think there are only 8 here.
Really like to see the progress. Are your heads going to Steve W?
Yes heads are going to Steve Weiner, also supplying me with:
Bilstein BSS 10 coil overs
Clutch & goodies
Viton seal set
Rings
All bushing work for rods, rockers
Currently removing oil tank and cleaning the oil cooler
Ive seen a feel 993 s in Saskatoon but not many
03-19-2016, 11:22 PM
Advanced
Join Date: Mar 2015
Location: LCC, Utah
Posts: 66
Likes: 0
Great progress! Subscribed.
03-20-2016, 09:55 PM
AutoX
Join Date: Mar 2016
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Good opportunity to relace all the rear drive shaft boots and repack the bearings whlie you are at it, save further expense if those bearings have pushed most of their grease which may well be the case by looking at your pics.
03-22-2016, 10:11 AM
Rennlist Member
Thread Starter
Join Date: Nov 2011
Location: Saskatoon SK Canada
Posts: 807
Quote:
Originally Posted by
porsche993356911
Good opportunity to relace all the rear drive shaft boots and repack the bearings whlie you are at it, save further expense if those bearings have pushed most of their grease which may well be the case by looking at your pics.
Took your advise, going to replace & pac all CVs
So i lied when i said the snow was gone, in 1910 it was +17C here. I think global warming passed us by
Attached Images