911porschefan

Looking for 18" wheels for my NB 964. Want something multi-spoke, or even Ruf wheels. Thinking HRE 563R or iForged Rev or Fikse Profil 13 (I think).

Not a fan of the BBS Y spoke style wheel. Let me know what's available.

Goughary

Mikep has a set of bbs 18 wheels that came off his c2 that you may want to look at. And porschenutlee has a set of oz wheels that are similar to the ruf wheels but three piece. They are also a good looking wheel...

911porschefan

saw both sets and not what I'm looking for. Has anyone fit a 12" wheel on the back, any rubbing issues.

BLACK-BETTY

Not posssible.

Goughary

The bbs wheels that Mikep has for sale are just about the biggest you can fit. Give him a shout. They are very good wheels and look fantastic

18T_BT

I have a set of these collecting dust in the garage I am willing to let go for pretty cheap:

911porschefan

Thanks for the suggestion, not looking for factory wheels, I have a set of D90's, cup 1, cup 2, targa wheels and turbo twists (on the car). Just can't seem to decide.

A Foley

Just sold my nb C2 and I have a set of BBS RS-GT and a set of RH "Turbo P" that I no longer have use for. Both 18" x 8.5" / 10"
Let me know if you're interested in either.

Dr Mitch

I've got (only two) Forgeline WC3 gunmetal sitting in my storage room.
Only one front and one rear. Can't recall the wheel widths - but pretty sure 8 and 10 as they were for a NB 964.
Your welcome to drop by and check them out. They're about $1300 a piece new. Would sell them for a WHOLE lot less...
(I was considering making one into a wall clock and the other into a coffee table!)


Pic was before I cleaned them up.

http://www.forgeline.com/products/wc...y&pricing=1#q3

A Foley

Sorry about the hijack
Got a couple of pm's about the RS GT. Installed once for fitment after powder coating. They've been collecting dust since.

swftiii

I've got a set of 18" BBS RS-GT and Fikse FM10s in the marketplace for sale. Take a look and let me know.

mooty

i would take skips fikse in your case.

you dont liek BBS, but that is the best period.
then fikses, forgeline

12" no way, not even wide body cars.

in 18" dia, 8" front 10" rear around ET50 is all that will fit.
you can fit 8.5 and 10.5 but if you aligned the car correctly, anything bigger than 8 and 10 will rub.
we physically tried it on our cars.

some wont listen. a good buddy replaced rear and is thinking replace front now.

18T_BT

Here is what an 11" wheel looks like on a NB: https://rennlist.com/forums/964-foru...l#post13013960