cam gear
#16
Advanced
Thread Starter
Join Date: Dec 2012
Location: Aurora Ontario
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Took my cam gears off and to my surprise they did not wear evenly . About 1/2 of each gear
Still have some coating on them and other half showing bad wear. I know PO had to deal with tb jumping a few teeth and bending a few valves. Heads were done ,quality of work is questionable ? Could camshaft be bend ? Will post pictures next
Still have some coating on them and other half showing bad wear. I know PO had to deal with tb jumping a few teeth and bending a few valves. Heads were done ,quality of work is questionable ? Could camshaft be bend ? Will post pictures next
#17
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Because they are made of soft alloy with an uneven spray on coating.
That is why Porsche changes the design.
That is why Porsche changes the design.
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."