Oil Level Sensor Stuck
07-04-2017, 06:52 PM
#1
Racer
Thread Starter
Oil Level Sensor Stuck
Is there some trick to the oil level sensor? Have a new gasket for it on order. The three bolts are out, but it doesn't seem to budge. Dead blow hammer on the flange didn't help.
07-05-2017, 02:24 PM
#2
Rennlist Member
There is no press fitment, it should just come off, its just metal then gasket then metal.
See if you can get a blade in between the metal and paper gasket to cut the gasket.
See if you can get a blade in between the metal and paper gasket to cut the gasket.