![](https://rennlist.com/forums/./customavatars/avatar173844_2.gif)
GT6ixer
February 18, 2018
Using a 4" C-clamp and a 1/2" spade bit you can easily press out the old bezel. You will need to use a cap that is about an 1.5 inches deep on the other side as shown here so the bezel has room to press into it. Make sure the rim of the cap is wide enough so as to not leave a mark on the leather or vinyl.
More About This Picture
Vehicle
N/A
Location
N/A
Keywords
N/A
Discover More Pictures
See MoreAdvertisement
Be the first to comment on this picture!