![](https://rennlist.com/forums/./customavatars/avatar58004_38.gif)
Petza914
March 7, 2021
On the phillips head screw, I had to cut one of my short bits in half, then wedge a trim tool at the top of it to hold the bit tight into the screw and then use an open end 1/4" wrench about 80 times with a 1/4 turn each to get the screw out.
More About This Picture
Vehicle
N/A
Location
N/A
Keywords
N/A
Discover More Pictures
See MoreAdvertisement
Be the first to comment on this picture!