Cost for Custom Wheels.
06-18-2015, 12:38 PM
#16
Drifting
Thread Starter
Join Date: Jul 2009
Location: Belmont Shore in Long Beach CA
Posts: 2,740
Likes: 0
Received 2 Likes
on
2 Posts
Found it. It's called the Monotec T10 and all examples I have seen have been that Matte Black finish. Don't know if they would make a Chrome version or not. And it would probably cost about how much these rims are new to get them chromed. So I may just go with Matte Black - would look good if PTS in Arena Red.
06-21-2015, 11:05 AM
#18
This is also similar to the 993 TT wheels...
https://scontent-fra3-1.xx.fbcdn.net...03431091_o.jpg
As i know, the quote per wheel set in 20" is about 6.500,- >7.000,-USD
Keep in mind, these are only forged monoblocs...
https://scontent-fra3-1.xx.fbcdn.net...03431091_o.jpg
As i know, the quote per wheel set in 20" is about 6.500,- >7.000,-USD
Keep in mind, these are only forged monoblocs...
06-21-2015, 12:29 PM
#20
Drifting
Thread Starter
Join Date: Jul 2009
Location: Belmont Shore in Long Beach CA
Posts: 2,740
Likes: 0
Received 2 Likes
on
2 Posts
Zer Gut Fuchs. If I spelled that right?
I like the wheel by Monotec that I posted above. But I would easily choose a chrome version over the matte black. Twenty inch of course and in the proper bolt pattern of course.
I like the wheel by Monotec that I posted above. But I would easily choose a chrome version over the matte black. Twenty inch of course and in the proper bolt pattern of course.
06-21-2015, 03:41 PM
#21
Rennlist Member
This is also similar to the 993 TT wheels...
https://scontent-fra3-1.xx.fbcdn.net...03431091_o.jpg
As i know, the quote per wheel set in 20" is about 6.500,- >7.000,-USD
Keep in mind, these are only forged monoblocs...
https://scontent-fra3-1.xx.fbcdn.net...03431091_o.jpg
As i know, the quote per wheel set in 20" is about 6.500,- >7.000,-USD
Keep in mind, these are only forged monoblocs...
07-03-2015, 05:02 AM
#23
2nd Gear
Join Date: Jul 2015
Location: Camarillo, CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
07-17-2015, 12:28 PM
#24
Drifting
Thread Starter
Join Date: Jul 2009
Location: Belmont Shore in Long Beach CA
Posts: 2,740
Likes: 0
Received 2 Likes
on
2 Posts
Thanks for the heads up. I remember Associated Electric use to make the Chassis of their multiple off road 1/10th scale world champion out of 6061-T6 for years. That's a little off topic.