Synthetic Rope for Superwinch S7500
#16
I have the S5500 that came with the synthetic rope and the fairlead looks the same as the one you purchased.
Charley
Last edited by CharleyH; 07-22-2017 at 05:11 PM.
#17
Seems like the custom cables from the sites referenced above run in the $150+ range.
Any reason this $65 rope from AMAZ is no good? It's 5ft short, but I don't need all 55'
Or this 100 foot for $100 which I can shorten?
Any reason this $65 rope from AMAZ is no good? It's 5ft short, but I don't need all 55'
Or this 100 foot for $100 which I can shorten?
Those will likely work. As long as you never get close to unreeling it, the tail design is not that important, it's not meant to hold a load, it's just mean to make it easy to install.
#18
I bought a 50x1/4" Dyneema rope from amazon. It was a quality bit of kit, retrofitted easily on a S5000 winch. It needs to be larger in diameter than the cable that came with your winch, so length is limited by how much will fit on the spool.
Those will likely work. As long as you never get close to unreeling it, the tail design is not that important, it's not meant to hold a load, it's just mean to make it easy to install.
Those will likely work. As long as you never get close to unreeling it, the tail design is not that important, it's not meant to hold a load, it's just mean to make it easy to install.
#19
You know, I don't know what I was thinking when I said that. You're correct. Breaking strength is what really matters on diameter selection.
#21
You are going to really enjoy this set up!
Charley
#22
I would contact Superwinch directly and get the direct replacement rope from them. Then you know it will work well. I'm sure you can get good rope from many sources, but the prices seem to be similar to the OEM prices, you may as well get a rope that you know will work well.
Charley
Charley
db
#23
Charley
#25
2) Does the hook on your steel cable appear to be removable, usable for reinstallation?
Answer those and you'll have your answer.