Jgarvish

FOR SALE: 2016 All Aluminum Aluma (8220 TILT) Open Car Hauler Trailer - $7000 obo

I'm selling my Aluma trailer because I'm upgrading to a 24 foot enclosed. Wife said no more trailers until you sell one. The trailer has very few miles on it (maybe 500) as I used it primarily to take my GT4 to COTA (~50 miles roundtrip). This trailer has a stone guard, tire carrier, and spare tire (with carrier).

It weighs 1600 lbs with a bed size of 81" X 244" and can carry 7500 lbs.

Here are the standard features:

•2-3500# Rubber torsion axles - Easy lube hubs
•Electric brakes, breakaway kit
•ST205/75R14 LRC radial tires (1760# cap/tire)
•Aluminum wheels, 5-4.5 BHP
•Control valve to adjust rate of descent
•Bed locks for travel and for locking bed in up position
•Removable aluminum teardrop fenders
•Extruded aluminum floor
•Front retaining rail
•A-Framed aluminum tongue, 44.5" long with 2-5/16" coupler
•8) stake pockets (4 per side);
•4) Recessed tie rings, SS 5000#
•Padded tongue jack, 2500# capacity
•LED Lighting package, safety chains
•Overall width = 101.5"
•Overall length = 315"
•Tilt = 7.5°


I'm located in Austin Texas and you can reach me at (512) 626-4823 or jgarvish@gmail.com.

pcavender

Is this trailer still for sale?



QUOTE=Jgarvish;14527145]FOR SALE: 2016 All Aluminum Aluma (8220 TILT) Open Car Hauler Trailer - $7000 obo

I'm selling my Aluma trailer because I'm upgrading to a 24 foot enclosed. Wife said no more trailers until you sell one. The trailer has very few miles on it (maybe 500) as I used it primarily to take my GT4 to COTA (~50 miles roundtrip). This trailer has a stone guard, tire carrier, anod spare tire (with carrier).

It weighs 1600 lbs with a bed size of 81" X 244" and can carry 7500 lbs.

Here are the standard features:

•2-3500# Rubber torsion axles - Easy lube hubs
•Electric brakes, breakaway kit
•ST205/75R14 LRC radial tires (1760# cap/tire)
•Aluminum wheels, 5-4.5 BHP
•Control valve to adjust rate of descent
•Bed locks for travel and for locking bed in up position
•Removable aluminum teardrop fenders
•Extruded aluminum floor
•Front retaining rail
•A-Framed aluminum tongue, 44.5" long with 2-5/16" coupler
•8) stake pockets (4 per side);
•4) Recessed tie rings, SS 5000#
•Padded tongue jack, 2500# capacity
•LED Lighting package, safety chains
•Overall width = 101.5"
•Overall length = 315"





•Tilt = 7.5°


I'm located in Austin Texas and you can reach me at (512) 626-4823 or jgarvish@gmail.com.[/QUOTE]