When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looks like we'll need more than 6! I'll get another order going quickly. I think the best way to go about it would be to ship out those that have reached out since my first post to confirm for the first 6, then send out a 2nd batch. If I don't have shipping information for anyone in the first 6 by the time I get them, I'll move on to the next in the list and supply you with one from the second batch. Fair?
Estimated ship date December 1
1. gums (awaiting shipping info)
2. mannym5
3. stuutgart46
4. RedTele via PM (awaiting shiiping info)
5. Dave DE via PM
6. Sean Gibbons (awaiting shipping info)
second batch, estimated ship date December 15
1. jlanka
2. Deadeye
And if there are any of you that are packed up for winter and don't mind being in the second batch, let me know. Also, if anyone needs one immediately. Just want to get everyone taken care of!
Do you need to know anything about the cage configuration?
per the posted photo and an earlier post, these are 24"x36", with 14 straps, which should fit most cages with a windshield bar near the frame and a standard main hoop pretty good. I can get custom sizes made but they are likely going to be a few more bucks.
Yes, I've had a handful made at Teamtech for our Boxster Spec builds (including the one in the photo above). They come with the sewn in straps(14), as pictured. The size is 24" x 36" and fits our cages well, which have the windshield bar stitched to the windshield frame. I retail them at $215, but I am currently out of stock. I can get a half dozen on order if you guys would like, and they should be ready in a couple of weeks for shipping.
They do NOT come with a certification tag like the standard window nets but are of course made with the same material. They have passed through POC/PCA/NASA tech several times.
I also have one used net available in the same size with open ends, like a standard window net that you could use with steel cable. I had that one installed on my car before we went to the sewn in straps. I'll sell that one for $75 if anyone wants to go that route instead. It's just more a pain to install and uninstall when needed.
The manufacturer told me to install it UNDER the roll bar, but it flops in the wind, blocking the mirror. So I put it OVER the roll bar and it fits fine. Hope that's okay.
11-23-2015, 07:32 PM
