Notices
996 Forum 1999-2005
Sponsored by:

2002 Targa A/C Foam Repair

Thread Tools
 
Search this Thread
 
Old 08-10-2024, 01:24 AM
  #1  
oldsouth
3rd Gear
Thread Starter
 
oldsouth's Avatar
 
Join Date: Feb 2024
Posts: 3
Likes: 0
Received 1 Like on 1 Post
Default 2002 Targa A/C Foam Repair

I have a 2002 Targa that I decided to repair the a/c foam coated doors. I started on the inside one behind the center stack and it doesn't look like videos I have seen. Looks like I am seeing the one accessible from the outside. Does some 996 cars not have the one behind the center dash stack?

Old 08-10-2024, 09:02 AM
  #2  
Thereddevil
Advanced
 
Thereddevil's Avatar
 
Join Date: May 2024
Location: Florida
Posts: 51
Received 47 Likes on 17 Posts
Default

I just posted the same question on my 2001. I only see one door.
Old 08-10-2024, 10:43 AM
  #3  
oldsouth
3rd Gear
Thread Starter
 
oldsouth's Avatar
 
Join Date: Feb 2024
Posts: 3
Likes: 0
Received 1 Like on 1 Post
Default

I'm taking the outside accessable door out this morning. Will make sure there isn't another one behind it.
The following users liked this post:
Thereddevil (08-10-2024)
Old 08-10-2024, 11:59 AM
  #4  
Thereddevil
Advanced
 
Thereddevil's Avatar
 
Join Date: May 2024
Location: Florida
Posts: 51
Received 47 Likes on 17 Posts
Default

OP, it looks like you have 2 doors in the pics. Both have foam. I dont see that on my 2001.
Old 08-16-2024, 12:37 PM
  #5  
oldsouth
3rd Gear
Thread Starter
 
oldsouth's Avatar
 
Join Date: Feb 2024
Posts: 3
Likes: 0
Received 1 Like on 1 Post
Default




There were 2 doors. Both now fixed and no more black foam bits. Air still blows out of the windshield vents some though when on A/C. I ordered the Vision Vents to re-direct the flow. From what I read that is normal for the system to blow cold air onto the windshield. Poor design...
Old 08-16-2024, 01:47 PM
  #6  
Thereddevil
Advanced
 
Thereddevil's Avatar
 
Join Date: May 2024
Location: Florida
Posts: 51
Received 47 Likes on 17 Posts
Default

Originally Posted by oldsouth



There were 2 doors. Both now fixed and no more black foam bits. Air still blows out of the windshield vents some though when on A/C. I ordered the Vision Vents to re-direct the flow. From what I read that is normal for the system to blow cold air onto the windshield. Poor design...
mine is still blowing put of the upper vents also. Not much though. I will look into Vision Vents. Thanks



Quick Reply: 2002 Targa A/C Foam Repair



All times are GMT -3. The time now is 02:48 PM.