Mark this thread as Unsold
Spyder or Cayman R Wheels
08-14-2017, 04:32 PM
#1
Three Wheelin'
Thread Starter
Spyder or Cayman R Wheels
Category: Wheels & Tires
Price (no $ sign please): $3250
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 986, 987, Cayman
Location (Region): NorthEast
Item Condition: Used
These were taken off of 2011 Boxster Spyder and come with almost-new MPSS (Michelin Pilot Super Sport). Wheels alone cost $5,400 at Suncoast with MSRP of $6,868.56. https://www.suncoastparts.com/product/987CSPYD.html
Other than being a little dirty, they are in very good used condition. One thing I'll point out is that one of the front wheels is marked on an inner portion as "bent". I personally cannot see a bend so it's possible that it was already repaired previously. However, I don't know for sure because they came on the car that way.
Either way, it should be an easy fix for a reputable wheel guy. FWIW, the last time I had a minor bend repaired it cost me $200. If the possibly bent wheel bothers you, I can substitute it with another Spyder wheel (yes, I have 2 sets of Spyder wheels
) - caveat being that the substitute has some surface scuffings from being on a driver. Again, the scuffing can easily be re-surfaced.$3,250. PM me if interested! Buyer pays shipping and PayPal fees.
Last edited by the_vetman; 08-31-2017 at 03:19 AM.
08-25-2017, 12:35 AM
#2
Rennlist Member
Tire Details
Date codes on the tires, install date and miles on them?
Also, your other set of wheels, are they the same Spyder silver or are they the CR Hyper Silver? If selling those, can you point me to your ad? Thanks.
Also, your other set of wheels, are they the same Spyder silver or are they the CR Hyper Silver? If selling those, can you point me to your ad? Thanks.
08-25-2017, 12:50 AM
#3
Three Wheelin'
Thread Starter
Rears are 3815 and tread of 7-8/32nd.
I don't know install dates or miles.
My other set of wheels are Spyder wheels (i.e. not Hyper Silver), but they are not for sale - they're on the car.
If someone's concerned about the bent wheel, however, I'm willing to swap them out.