Mark this thread as Unsold
997 X51 Powerkit
#16
Category: Engine - Intake/Fuel
Price (no $ sign please): $4000
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 997
Location (Region): Europe
Item Condition: Used
#18
Rennlist Member
so have we determined whether this would be a straight, no-issues bolt-on to a pdk equipped 997.2 car?
ecu re-tune requirement after bolting on parts?
and where in europe would these parts be shipping from?
thx
ecu re-tune requirement after bolting on parts?
and where in europe would these parts be shipping from?
thx
#19
Can't advise if these would fit a 997.2 PDK, I have provided the part numbers, maybe you could check with a local OPC?
A re-tune would be needed.
Parts will be shipped from either the UK or Switzerland, depends where I am at the time.
Nick
A re-tune would be needed.
Parts will be shipped from either the UK or Switzerland, depends where I am at the time.
Nick
#20
Rennlist Member
#23
Ooh I want! Available?
#25
Rennlist Member
Prospective buyers may want to speak to Suncoast, Sunset, Sonnen, etc about the labor required for an X51 upgrade/conversion. It is much, much more than bolt on kind of deal based on conversations with Suncoast and Champion Motorsport.
#26
Three Wheelin'
that carbon airbox is nice.
#27
FYI missing a lot of parts to install. MAF wiring extension, longer oil fill tube, two rubber airbox extensions + gromet for 2nd opening of decklid, TB to airbox tube, two sets of rubber to mate the X51 intake to center and four clamps. Also appears to be missing MAF that should be bolted to the X51 airbox.