Slakker

Category: Accessories
Price (no $ sign please): $750
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 993, 996, 997
Location (Region): Midwestern
Item Condition: Used

18" Porsche BBS Carrera III Wheels with NT01 tires. The fronts still have about 65% of their life left, the rears probably have 4-6 track days left. These wheels don't have any issues balancing but appear to have had multiple layers of paint along with recent overspray. They are good candidates for fully refinishing or plastidipping and tracking. New they run $5200 for the set, I will take $750 with or without the tires.

18"x8" ET57 (997.362.136.00) w/ 245/40/18 dated 30th week of 2015
18"x10" ET58 (997.362.140.01) w/ 275/35/18 dated 16th week of 2014

black04

What is the radial and lateral runout? I read somewhere that Porsche specifies 1.25mm max. Do these exceed that? Thanks for any information.

Slakker

Yikes. You've stumped me. I'm not sure what question you are asking. If it's the tires, NT01s are good until the cords. I last ran these at Circuit of the Americas in February for a few warmup sessions while I was learning the track and they felt smooth and balanced.

black04

I'm trying to find out if the wheels are round and true.

I'm ok with the scuffing and paint layers showing.

Slakker

Yes to the extent that I have never had any issues getting tires to balance properly and they aren't bent or cracked. I don't think it's too expensive to have them fully trued up if that's a priority but as long as they are smooth and don't wear the tires unevenly I haven't seen the advantage.

Slakker

Bump

Slakker

Bump