Mark this thread as Unsold
FS: 991 H&R Springs part# 28880-2
#1
Rennlist Member
Thread Starter
FS: 991 H&R Springs part# 28880-2
Category: Steering & Suspension
Price (no $ sign please): $175
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 911
Location (Region): SouthEast
Item Condition: Used
These were on my AWD 991.2 Targa 4S
Please check attached H&R link for fitment on other 911 (991) variants.
Shipping not included
http://www.hrsprings.com/applications
Last edited by JPMD; 03-17-2019 at 08:54 PM. Reason: price change
#2
Rennlist Member
Did you have front axel lift on your targa?
#3
Rennlist Member
Thread Starter
no lift.
The H&R spring is rather aggressive however no tire rubbing etc.
Will clear speed bumps but caution with steeper inclines.
For aesthtic reasons I added spacers to the front wheels. This probably varies based on offset.
My honest opinion if you want the sportiest set up and look go H&R If clearance may be an issue choose TECHART.
The H&R spring is rather aggressive however no tire rubbing etc.
Will clear speed bumps but caution with steeper inclines.
For aesthtic reasons I added spacers to the front wheels. This probably varies based on offset.
My honest opinion if you want the sportiest set up and look go H&R If clearance may be an issue choose TECHART.
#4
Rennlist Member
Thread Starter
Price reduction $275
#5
Rennlist Member
Thread Starter
Price reduction $250
#7
Rennlist Member
Thread Starter
Trending Topics
#8
Rennlist Member
Thread Starter
Spoke with Tom at Champion Motorsports the bump stops are for the front.
#9
Rennlist Member
Thread Starter
Price reduction $225
#10
Rennlist Member
Thread Starter
Bump
#11
Rennlist Member
Thread Starter
Price reduction $175
#13
Rennlist Member
Thread Starter
#14
Rennlist Member
Thread Starter
SOLD
Thank-you
Thank-you