Mark this thread as Unsold
Race car intercom,Peltor FMT200, New
03-04-2016, 08:13 AM
#1
Advanced
Thread Starter
Join Date: Mar 2010
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Race car intercom,Peltor FMT200, New
Category: Audio/Video/Electronics
Price (no $ sign please): $700
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): Race Car
Location (Region): Europe
Item Condition: Brand New
This is new and comes in the box with manual, 2 helmet leads and power cables.
FMT200 Sets a new standard for rally intercom
The design of the Peltor FMT200 rally intercom is based upon more than 30 years of experience from the rally sport and close co-operation with several of the world´s leading rally teams.
A lot of the input comes from today’s top co-driver like Risto Mannisenmäki (driver Tommi Mäkinen), Nicky Grist (driver Colin McRae) and Louis Moya (driver Carlos Sainz).
The goal was to minimise the disturbing noise (fuss, distortion) from other electronics in the car, minimise the risk of wrong handling as well as maximise the audibility and the communication possibilities in the extreme environment of a rally car. This goal has guided the designing and the choice of material for Peltor FMT200. The new rally intercom is also developed with the possibilities to connect communication radio, GSM-telephone and outgoing signal for video.
Technical information
The FMT200 has a cover of aluminium with rear and front panels made of conductive plastic to minimise the influence of other electric signals in the rally car.
The front is designed to facilitate manoeuvring of the Peltor FMT200 intercom. It is manoeuvred by push buttons and the information about setting, levels e.t.c. is shown by LED’s.
At the rear one can find in/outputs for headsets and helmets, mobile phone, communication radio and audio output for signal to for example a video camera. The FMT200 is standard equipped with cables for headset/helmet and for power supply from the car battery. The FMT200 works also with an internal 9V battery.
Signal level for GSM phone and for communication radio may be adjusted.
Functions
There are different settings for stages/road sections and for driver/codriver. When "Stage" is activated, your personal settings for stages are selected and there are no external signals (GSM phones and communication radio) entering the system. At the "Road" settings, the complete communication is possible through GSM phone and communication radio.
A VOX function is possible to use when "Road" is selected. The result is a supression of noise when no communication takes place. This creates quiet and more restful road sections.
Peltor FMT200 Rallyintercom is approved in accordance to EN50081-1, EN50082-2 and ISO7673-1.
Last edited by flatsixforever; 04-14-2016 at 11:37 PM.
